The Fisher & Paykel Eson Nasal Mask is a lightweight nasal mask with limited contact pressure points.
Fisher & Paykel Eson Nasal Mask
The Fisher & Paykel Eson Nasal Mask is a lightweight nasal mask with limited contact pressure points. Designed with a exhalation diffuser to keep noise levels down.
– RollFit Seal
– Exhalation Diffuser
– Three simple parts
– Eson nasal mask
– 5 spare diffusers
***Warranty: 3 months
Hodl the Frame with one hand and the headgear in the other. One of the headgear clips should be hooked into frame. Pleace the seal on the nose and guide the headgear over the head. Hook the unattached headgear clip into the frame. Gently tighten the straps.
* Do not over-tighten any of the headgear straps
Forehead straps should rest horizontally on the forehead, just above the ears.
To take off the mask system, unhook one headgear clip from frame. Hold frame and guide straps over the head.
Unhook the headgear clips from the mask frame.
Slide the forehead straps of the headgear downwards from the top of the mask frame. Remove the silicone seal from the mask frame.
Remove the swivel from the elbow.
Fisher & Paykel Cleaning Instructions:
– Wash your mask excluding the headgear assembly in soap dissolved in lukewarm water. Do not soak for more then 10 minutes.
Rinse thoroughly with fresh water, ensuring that all soap residues are removed.
Leave all parts to dry out of the direct sunlight before reassembling.
*Do not wash diffuser
– Handwash the headgear in luke-warm water using mild soap. Rinse well and allow to air dry out of direct sunlight.
*The diffuser should be replaced every 2 to 3 months, Do not wash or rinse the diffuser.