Resmed Mirage FX Nasal Mask is simple and easy to use. It seals well on high pressures and only has 4 simple parts. Has a duel – wall Cushion that is very soft on the face and is available 3 sizes.
Resmed Mirage FX Nasal Mask
Resmed Mirage FX Nasal Mask is simple and easy to use. It seals well on high pressures and only has 4 simple parts.
– Flexible forehead support
– Duel – wall Cushion
– Four simple parts
– Mirage FX nasal mask
***Warranty: 3 months
Hold the Frame with one hand and the headgear in the other. Place the seal on the nose and guide the headgear over the head. Hook the bottom headgear onto the hook on the frame. Make sure headgear comes under the ears. Gently tighten the straps.
* Do not over-tighten any of the headgear straps
Forehead straps should rest horizontally on the forehead, just above the ears.
To take off the mask system, unhook the headgear from frame. Hold frame and guide straps over the head.
Unhook the headgear from the mask frame.
Slide the forehead straps of the headgear downwards from the top of the mask frame to find gap and pull headgear out of gap. Remove the silicone seal from the mask frame.
Remove the swivel from the elbow.
Resmed Cleaning Instructions:
– Wash your mask seal excluding the headgear assembly in soap dissolved in lukewarm water. Do not soak for more then 10 minutes.
Rinse thoroughly with fresh water, ensuring that all soap residues are removed.
Leave all parts to dry out of the direct sunlight before reassembling.
*Do not wash diffuser
– Handwash the whole mask in luke-warm water using mild soap. Rinse well and allow to air dry out of direct sunlight.