Resmed N10 Nasal Mask

Home/CPAP Equipment/CPAP Masks/Resmed N10 Nasal Mask

Resmed N10 Nasal Mask

The Resmed N10 Nasal Mask is the latest nasal pillow mask on the market from Resmed. Made up of only 3 parts and is very lightweight on the face. Available in Pink and blue headgear.

Categories: ,

Description

The Resmed N10 Nasal Mask is the latest nasal pillow mask on the market from Resmed. Made up of only 3 parts and is very lightweight on the face. Available in Pink and blue headgear.

SIZES:
– Small
– Standard
– Wide

FEATURES:
– Lightweight
– Simplistic design
– Under-eye Frame
INLCUDES:
– N10 Cushion and frame
–  Pink or Blue headgear
***Warranty: 3 months

Adjustment:
When comfortable over the nose, pop the headgear over the head. Make sure the bottom strap comes under the ears. Use the magnets to join to frame and then use the Velcro to tighten the straps at the top and bottom of the headgear.

Removal:
To take off the mask, disconnect the magnets at the bottom and pull over head.

Disassembly:
Holding the top of the mask and frame, squeeze the tab and pull the seal away from mask frame.
Remove headgear by disconnecting the Velcro on top and sliding the headgear from the frame

Resmed Cleaning Instructions:

DAILY:
– Disassemble the nasal seal from the frame according to the disassembly instructions above,

– Thoroughly clean the separated components (excluding headgear), by gently rubbing in warm water using mild soap.

– To optimize the mask seal, facial oils should be removed from the seal after use.

– Inspect each component and, if required, repeat washing until visually clean.

– Rinse all components well with drinking quality water and allow to air dry out of direct sunlight,

– Reassemble when all parts are dry.

WEEKLY:
– Handwash the headgear in warm (30deg) water using mild soap. It may be washing without being disassembled. Rinse well and allow to air dry out of direct sunlight.